Finishing

ACID FILLING LEVELLING MACHINE + ACID LEVEL CONTROL

Mainframe made stainless steel AISI 316L, equipped with adjustable foots, safety panels and doors – all equipped with safety devices in according to CE standards. Frame contains two machines.

Filling levelling unit has polypropylene tank divided in two sectors, equipped with  centrifugal pump and pneumatic valves for selection and filling of acid inside the batteries. Device for detection of presence of acid inside the batteries. Three ways solenoid valves for commutation of unit from filling to levelling. Six little heads with six spouts adjustable. Levelling system equipped with vacuum pump. Pneumatic cylinder for up/down of head.

Acid level control unit equipped with special devices for control of acid level. Differential transducers verify the difference between the external pressure, checked by a pipe, and the against-pressure, checked by a pipe connected to a spout immersed in the acid at established depth. Pneumatic cylinder for up/down of head.

Conveyor for battery transport equipped with synchronizer and stoppers.

Discarding bench capacity 3 batteries equipped with expeller cylinder

Electrical cabinet with PLC Siemens S7-300, operator interface panel, push-button panel for manual commands.

Product Table

Machine

ACID FILLING LEVELLING MACHINE + ACID LEVEL CONTROL MACHINE

Type

FLCM – 02

Weight

1300 Kgs

Power supply

380 V + 3 KW 3 phase + N + GND

Air consumption

150 Nl

Pressure

6 bar

Piping connection

Ø 12 mm

Sizes

4500 mm (A) x 2100 mm (B) x 1650 mm (C)

Productivity

From 3 to 5 batteries / minute (depending from sizes of batteries)

Position in line Finishing