Finishing

HEAT SEALING MACHINE + LEAKAGE CONTROL MACHINE FOR DOUBLE LID

HEAT SEALING MACHINE FOR DOUBLE LID:

Mainframe made of  stainless steel AISI 316L (*), equipped with adjustable feet, safety panels and doors – all equipped with safety devices in according to CE standards.

N° 2 heat sealing heads (**)

Lid taker system with mechanical hookings and suckers. Pneumatic cylinder for up/down of lid taker. Manual change of tools.

Battery lifting table moved by pneumatic cylinder. It allows the movement of battery during the functioning of machine. The battery is lifted up to it lean against the stoppers of the guides, allowing the melting.

Regulation of width of guides by gear motor and chains connected to screws attached to the guides. In this way by the buttons of operator interface panel it’s possible to open/close the guides. On the guides the synchronizer and stoppers are attached.

The melting between double lid and box is guaranteed by suitable distancers attached to lid takers. This last goes down up to the distancers lean on the top plate, creating the right distance between the double lid and top plate.

Conveyor for battery transport has “rolling shuttle”, made of stainless steel AISI 316L. Support frame of conveyor made of stainless steel AISI 316L.

Continue

Electrical cabinet with PLC Siemens S7-300, operator interface panel, push-button panel for manual commands.

N° 1 set of tools (lid taker, top plate and bottom plate) included in the supply (type at Customer’s choice).

 

(*) The frames of two machines are separated but connected between them.

(**)  The productivity of machine can be increased installing n° 3 heat sealing heads.

LEAKAGE CONTROL MACHINE FOR DOUBLE LID:

Mainframe made of stainless steel AISI 316L , equipped with adjustable feet, safety panels and doors – all equipped with safety devices in according to CE standards.

N° 2 leakage control heads. Pneumatic cylinder for up/down heads.

Distancer for regulation of height of  head. It  lean on top of lid, adjusting the height of head.

Spouts moved by pneumatic cylinder.

Test pressure adjustable from 0 up to 400 mbar

Discarding range to set

Motorized conveyor made o polypropylene with support frame made of stainless steel AISI 316L

Conveyor is equipped with synchronizer, stoppers and guides manually adjustable by apposite handle.

Discarding bench capacity 3 batteries equipped qith expeller cylinder.

Derivation electrical connected to electrical cabinet of heat sealing machine, push button panel for manual commands.

Product Table

Name of machine

HEAT SEALING MACHINE + LEAKAGE CONTROL MACHINE FOR DOUBLE LID

Weight

2700 Kgs

Sizes of machine

6300 mm (A) (*) x 1900 mm (C) x 2500 mm(B)

Weight of machine (including the electrical panel)

1020 Kgs

Power supply

380V + 12 KW 3 phase + N + GND

Air consumption

250 NL

Pressure

6 bar

Piping connection

Ø 16 mm

Productivity (two heat sealing heads)

N° 4,5 batteries/minute

Productivity (three heat sealing heads)

N° 6 batteries/minute

Position in line Finishing